How To Install Hatch Patterns In Autocad 2019

View Original  X

How to install custom hatch patterns in AutoCAD

By:

Support

Issue:

This article describes how to install custom hatch patterns in AutoCAD using PAT files.

Causes:

Hatch configuration files are saved in PAT-files.

Solution:

Agenda of this solution:

• Where to save the PAT-files - Windows
• Where to save the PAT-files - macOS
• Loading a custom PAT-file
• Editing a custom PAT-file

Use the following steps to install hatch patterns based on the different operating systems:

Where to salve the PAT-files

Windows Bone

Re-create the custom PAT -files into the default Support folder (see below) that AutoCAD uses to observe hatch patterns. Added PAT-files will cause hatches to be listed under the User Defined or Custom hatch carte du jour within AutoCAD.

• Windows 10:
  • C:\Users\<user name>\AppData\Roaming\Autodesk\AutoCAD <version>\Rxx.ten\<linguistic communication>\Support

Notes:

• Rxx.ten stands for a specific AutoCAD release version:
  • <Release version>:  R24.1: 2022; R24.0: 2022; R23.1: 2022; R23.0: 2022
• If you don't see the path in a higher place: The AppData and Application Data folders in the higher up paths are hidden folders
  • See How to turn on hidden files and folders on Windows.
• If at that place is no longer a PAT-file of an existing hatch used in a drawing, employ the express tool SUPERHATCH to endeavor and bring in the custom hatch pattern (not bachelor in AutoCAD LT).
• The default path is specified in the Back up File Search Path listed under the Files tab in Options. It is commonly the first one shown, pointing to the current user folder.

If the preference is to keep custom hatch patterns likewise as other customization in a dissimilar location, the folder(southward) need to be added to the applications search path.

To add together a custom folder to the applications support file search paths

1. Click the Application carte (the big "A" at the top left) Options.
2. In the Options dialog box switch to tab "Files" and select node "Support File Search Path".
3. Click "Add".
4. Click "Browse...".
5. In the "Browse for Folder"-dialog box, browse to and select the folder to add. Click OK.
6. In the Options dialog box, click OK.

macOS

1. On whatsoever drawing, blazon theHATCH command.
2. Click the pull-downward in the Hatch visor for Patterns and click Open up Library.

3. Click the drop-down arrow and select Add together Patterns.

4. Browse to the location of the custom .pat files, select them, and click Open.

5. Custom hatch patterns files volition automatically exist copied to the following locations:

• AutoCAD for Mac 2022 and after: ~Home/Library/Awarding Support/Autodesk/AutoCAD <version>/Rxx.x/roaming/@<language>@/Back up/Hatch Patterns
• AutoCAD for Mac 2022 to 2015: ~Dwelling/Library/Awarding Support/Autodesk/roaming/AutoCAD <version>/Rxx.x/<linguistic communication>/Support

Annotation: Rxx.x stands for a specific AutoCAD release version:

• <Release version>:  R24.one: 2022; R24.0: 2022; R23.1: 2022; R23.0: 2022

Loading a custom PAT-file

Follow these steps:

1. Set organization variable HPDLGMODE to ane.
   1. Enter HPDLGMODE into the command line.
   2. Blazon 1 and printing Enter
2. Enter command _HATCH. The "Hatch and Gradient"-dialog pops up.
3. In selection list "Blazon" select "Custom".

4. In field "Custom Pattern" click the iii dots-symbol.
5. The dialog "Hatch Pattern Palette" pops upwardly. Select in the left frame the specific PAT-file and in the correct frame the specific hatch design. Click Ok.

Note: If yous don't run into the PAT-file listed, ensure that the PAT-file is saved in one of the listed paths in the Support File Paths-node in tab "Files of the options. If information technology is still not listed, then the PAT-file is corrupted.

Editing PAT-files, using Notepad

You may edit the default PAT-files that are installed with AutoCAD by using Notepad and calculation your custom hatch pattern information at the end of the file. In that location are two files: acad.pat (British units) and acadiso.pat (metric units) (AutoCAD LT: acadlt.pat and acadltiso.pat), which are located equally noted above. Although line spaces are not required between hatch patterns pasted into the file, a bare line must be placed subsequently the last hatch blueprint definition in a PAT-file. If a blank line is not placed after the last hatch pattern definition, the last hatch design definition will not be accessible. Y'all can add comments by preceding text with two semicolons ( ;; ).

Products:

AutoCAD for Mac; AutoCAD LT for Mac; AutoCAD Products;

Post a question. Become an reply.

Get answers fast from Autodesk support staff and production experts in the forums.

Source: https://knowledge.autodesk.com/support/autocad/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-install-custom-hatch-patterns-in-AutoCAD.html

Posted by: bakerthomedran1983.blogspot.com

Share this post